AquaPhobic is a solvented acrylic polymer based coating for protection

of cementitious substrate with improvement in waterproofing and abrasion

resistance. It is applicable on absorbing tiles and concrete blocks for aesthetic look

and longer life.

Application Area :

Cement Tiles
Brick Work
Masonry & Rendered Wall
Asbestos Cement Sheets
Concrete Blocks

Benefits of UEPL AquaPhobic:

1.Single component & easy to apply
2.Economical
3.Highly penetrating into porous substrates to seal the pores
4.Prevent the growth of algae & fungi
5.Water Resistance
6.UV Resistance
7.Glossy finish

Coverage  :

Approximately 5 to 8 M2 per liter per coat depending on the porosity of the
substrate. Generally two coats are recommended. For higher performance three
coats can be applied 

Also Available:

• 0.8  Kg
• 4  Kg
• 16  Kg

Important Recommendations
Do not apply on wet surface
Do not apply on non-porous substrate like stone, ceramic tiles etc.
Take out only that amount of material that can be applied. Do not put back
unused material into the original container.

SAFETY PRECAUTIONS

Substrate must be dry, free of dust and loose & friable particles. Especially oil or
grease, if any must be completely removed After this, the surface should be
thoroughly cleaned by water and allowed to dry.